EthernetRoomManager Mini DIY - Do It Yourself (No Warranty)

EthernetRoomManager Mini (ERMM) is a low voltage universal controller board for electric and electronic devices control. It is a functional equivalent of RoomManager, with support for Ethernet LAN instead of RS485 bus. ERMM is optimized for decentralized home automation systems. Optimally it should be installed in each controlled room (or at least one per the floor in low budget scenarios). It can be controlled via PC, another ERM, or dedicated platform (e.g. ARM-based microcomputer). Applicable for I/O and measurement purposes.
It can be installed directly in room switch board together with 18 relays modules

SRP: 135.77 USD @10pcs
Vendor Prices:
95.04 USD @50pcs
81.46 USD @100pcs
67.89 USD @500pcs
54.31 USD @1000pcs

Small version of EthernetRoomManager: standard Credit Card size
Ready for plug in to MP-18 Relay module (IDC-50) socket without any additional components, cables and creating professional room installations.

24 programmable digital outputs (for relays control)
12 programmable digital inputs
8 programmable ADC inputs with thresholds support
3 PWM outputs for LED RGB dimmers
programmable IR receiver with support for Sony (SIRC) standard
programmable IR transmitter to control external AV equipment
built-in SNTP Client for automatic time synchronization (with automatic DST and time zones support)
device status is broadcasted via fast UDP messages to all panels and other devices in local network
controllable via secure TCP/IP commands (challenge-response authorization)
programmable clock and scheduler (up to 128 entries)
programmable outputs and dimmers programs (up to 24 entries)
programmable ADC measurement and regulation programs (up to 12 entries)
programmable IR control codes for external Audio-Video systems (up to 250 entries)
programmable IR control codes for direct management of ERM (up to 250 entries)

Other functions:

up to 250 ERM controllers in a singe installation
SPI Interface for future applications
I2C Interface for future applications
optional RS232 (TTL) interface for extension boards
multilingual programming libraries for integration to any PC system

Please also check:
eHouse4Ethernet EthernetRoomManager at manufacturer web page.
eHouse4Ethernet Home Automation Documentation

* 2 Year limited warranty requirements:
eHouse controllers are low voltage (12V) electronic modules without covers, for installation by qualified staff only and are highly stressed for improper installation, connection, isolation, transient protection or misuse.
We sell only ready to use (completely connected and seald) switch board with warranty.
All elements of ERM Switch board must be completely connected and sealed by eHouse authorized installers. Unless you are not able to comply our warranty conditions, please purchase products as DIY (Do It Yourself) - which is much cheaper.
We give warranty for segment under several condition:

Complete mounted and sealed switch board (low voltage)
- connection to switch cables IDC-14
- connection ready to plug in temperature sensors with cables (shielded) and socket
- connection IR front panel + cable IDC-14
- connection 12V power supply for ERM and LED dimmers
- connection Ethernet Cable
make photo documentation of whole installation and submit to us (before first powering of the system)
make photo documentation of installation and submit to us (in case of failure, problems)

Doc:
Więcej informacji:
http://www.isys.pl/ehouse,inteligentny_dom_budynek_sterownik_pokojowy_ethernet.htm
http://inteligentny-dom.ehouse.pro/c/ehouse4ethernet/
http://inteligentny-dom.ehouse.pro/mini-rozdzielnia-profesjonalna-do-samodzielnego-montazu/
Projektowanie:
http://inteligentny-dom.ehouse.pro/przykladowy-projekt-sterowania-salonem-w-domu-jednorodzinnym-z-oswietleniem-led-12v-ehouse-led/

Firmware Resources:

128 pozycji terminarza-kalendarza do wykonywania zdarzeń cyklicznych i serwisowych
24 programy pracy i sceny świetlne wyjść cyfrowych i ściemniaczy
12 programów regulacyjnych/pomiarowch
baza kodów podczerwieni (256) odbiór => zdarzenie eHouse
baza kodów podczerwieni (256) nadawania do zdalnego sterowania zewnętrznym sprzętem Audio/Video
interfejs Ethernet (10Mb)
32 inteligentne/programowane wyjścia
12 inteligentnych/programownych wejść cyfrowych (on/off)
obsługa ściemniaczy PWM/DC LED (1) lub RGB
dwustronna obsługa podczerwieni
realizacja pomiarów, regulacji wartości fizycznych z czujników analogowych (temp, oświetlenie itd) 10 niezależnych segmentów

Hardware Resources:

Ethernet (10Mb)
32 inteligentne wyjścia binarne (on/off) z driverami przekaźników (dla przekaźników 5..24V)
12 inteligentne wejścia binarne (on/off) (0..3v3)
3 ściemniacze LED 12V/2.5A
zasilanie 12-14V DC/~200mA (wbudowany zasilacz stabilizowany)
Wyjście Nadajnika podczerwieni IR
Wejście odbiornika podczewieni IR
10 inteligentnych wejść pomiarowych ADC(0..3v3)

Software Resources:

Oprogramowanie eHouse LAN (Windows, Linux, Java, Android, WWW) do konfiguracji, sterowania graficznego, wizualizacji, zdalnego sterowania przez SMS, WiFi, Internet, LAN.
Biblioteki programistyczne dla developerów do samodzielnego rozwoju oprogramowania i dedykowanych algorytmów

Interfaces:

Ethernet (10Mb)
RS-232TTL
SPI
I2C
IR - TX
IR - RX
PWM (3)

Item Translations: